Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill

If you are looking to buy a good hammer drill machine then Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill is a perfect choice. This device is manufactured by one of the most reputed company in the world i.e. “Hitachi” that made lots of high-performance products.

Let’s give you some brief about the company first!

Hitachi Company provides a broad range of professional tools as well as accessories that meant for the commercial construction, housing development, etc. The wide range products of the company have fetched technological advances and greater productivity to the industry. The companies headquarter located in the Atlanta, GA whereas its satellite offices situated in the Toronto ONT and Valencia CA.

Hitachi FDV16VB2
View on Amazon

Let’s talk about the product now!

Now, the company has introduced the Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill which is quite a useful product for drilling. It comes with the 5 AMP motor which is quite enough for drilling in the hard surfaces. You can only use it for the household purposes in comparison to the professional use as it meant for the light duty work.

In fact, a slip clutch is also given in the Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill so that it can keep the machine safe from getting damage. If you want to get better and accurate results with this machine, you should reduce the speed of the machine initially and use it slowly for drilling any hard surface. Otherwise, you can leave behind some unwanted marks on the surface.

It is effortless for professional to handle this Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill but if you are a beginner, then you have to be little cautious at the time of using the machine. This hammer drill comes with the feature of internally adjustable speed which allows you to reduce the rate at any stage as per your need.

In the below article, we have reviewed the Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill thoroughly along with its detailed features, advantages, and disadvantages. We hope that at the end of this review, you will have a very clear picture in your mind regarding the buying of this machine.

So, let’s continue.

Quick Overview of Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill

Product name

Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill

Chuck size

5/8-in

Chuck type

Keyed

Shank

Straight

Maximum RPM

2,900

Volt

120 V

Maximum BPM

46,400

Motor

Single phase, series commutator motor

Power source

corded-electric, Single phase 120V AC 60 Hz

Item Weight

3.5 pounds

Warranty

1-year warranty, 30-day satisfaction guarantee

Batteries Required?

No

Variable Speed

Yes

Editor’s rating

 3.7/5

Product link

Check this Product on Amazon →

Key features of Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill

It is essential to know about the key features of a product as it makes you more aware of the qualities present in the machine. The following are the key features of Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill which we want to discuss:

  • Good control and maneuverability The machine just has the weight more than 3 lbs. But still, it provides a balanced control and maneuverability while doing the drilling. It has a perfect power to weight ratio which does not allow the machine to shake while drilling inside any hard surface.
  • Variable speed control It comes with the feature of variable speed control dial which situated on the drill machine’s trigger. It is straightforward to use this control dial at the time of fast work or while doing any high-torque jobs. You can adjust the speed as per your need or requirement of the work.
  • Lightweight machine The Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill is a lightweight device in spite of the powerful 5 Amp motor. The weight of the product is only 3.5 lbs. Due to the ergonomic design of the tool; you can handle it easily with full control. In fact, you do not feel any exertion on your shoulders, arm or wrists while using the machine.
  • High-efficiency output With the help of the push button in the Hitachi FDV16VB2, you can do reversible drilling also. It let you quickly take out the drill machine from the surface after completing your job. This feature of the hammer drill results in higher efficiency of the product.
  • Fantastic bit retention It has an industrial grade keyed chuck which gives you greater bit retention. It benefits you a lot while doing hole on the surface which is hard.
  • Heavy duty motor The Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill comes with an inbuilt 5 Amp motor. It gives you the maximum RPM of 2,900 and maximum BPM of 46,400. The heavy-duty power of the motor offers you a great speed along with the improved performance.
  • Impeccable for different Variety of Jobs The Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill consist of a percussive hammer as well as a driver-drill which is just perfect for doing a different range of jobs like drilling into granite, clasping medium sized anchors, small sized anchors inside the concrete, etc. It can also do some other type of wood drilling and drive tasks like HVAC, plumbing, woodworking, electrical, and much more.
  • Switchlocated conveniently The drilling switch of the machine is located conveniently over the body of the hammer drill so that you can easily transit the speed of the tool. It not only saves your lots of time and in fact, but you can also steadily use it during the process of drilling.
  • Nonslipgrip It has an elastomer made non-slip grip which is specially designed to fit in your hands securely. It befits in getting a good and improved control over the machine at the time of the usage.
  • Durable construction The construction of the Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill is done with the help of the ball and needle bearing. It helps in adding or increasing then durability of the machine so that you can easily use it for the longest period without any issue. It also has a low-noise cooling air flow design which stops the tool from getting overloaded.
  • Accurate drilling With the help of the detachable side handle with depth gauge, you get a good control on this drilling machine. It lets you do the proper drilling depth which needed for the perfect anchoring.
  • Warranty Period The manufacturer of this product offers one year warranty along with the benefit of the 30-day satisfaction guarantee on the tool. So, in a case of any defects in the machine, you can ask for the repairing of replacement of the device.
Hitachi FDV16VB2
View on Amazon

Full Technical Specifications of Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill

The following are the full technical specifications of the Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill:

  • Weight of the product This toolkit has a weight of 3.5 pounds which makes the drilling machine a lightweight product which you can easily carry from one place to another without much issue.
  • Power connectivity It is an electric hammer driller machine which runs on the single phase 120V AC 60 Hz.
  • Number of speed settings It comes with the two-speed settings which range between 0 to 2900 RPM. Both the speeds settings help in covering all kinds of driving, drilling, and hammer applications.
  • Chuck key It has a chick key with 3-jaw that is required for tightening and loosening the keys of the drill machine. It comes with the 5/8-in chuck size.
  • Capacity This hammer drill has the ability of drilling 1/2-inch holes in steel, 5/8-inch holes in masonry and up to 1-inch holes in wood.
  • Rotation max speed The maximum RPM of the machine is 2900 which is quite enough for doing heavy duty jobs.
  • Power capacity It needs a power of 120 V for running the machine due to the high power 5 amp motor which located inside the machine.
  • Motor Power The inbuilt motor of the Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill is a single phase and series commutator motor which provides you 5 amp powers.
  • Length of the product It has a small size machine which comes with the range size of only 11-3/8-inches. It means you can easily carry this device along with you if needed.
  • Warranty period The manufacturer of the product provides the 1-year warranty on the tool along with 30 days money back guarantee offer.
  • Dimensions of the product The dimensions of the Hitachi FDV16VB2 are 14.8 x 13.4 x 4.3 inches.

What comes along with the Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill?

The following list of things you will get in the package of the Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill ate the time of buying:

  • Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill
  • Side Handle
  • Depth Gauge
  • Chuck Key
  • Injection molded plastic case
  • Instruction Manual
  • 1 Year Limited Warranty

Pros

  • Perform high-speed jobs The Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill comes with the variable speed control dial which located on the trigger for the stress-free use. It helps a lot at the time of high-speed or high-torque jobs.
  • Easy to speed transition You can quickly change the rate of the drilling machine with the support of the conveniently located drilling switch on its body. You do not have to make much effort for improving the speed of the tool.
  • Reversible drilling It comes with the push button which helps you in doing the reversible drilling from the hard surfaces. It let you quickly take you the tool from the wall or the surface when your job was done.
  • User-friendly It is a very user-friendly hammer drill which does not need much knowledge of operating. But still, if you want some guidance then just read the manual book which given along with the machine.
  • Ergonomic Design The ergonomic shape of the drill machine fits like a glove on your hands so that you can use it for the longest period without getting tired. You do not feel much stress on your hands or wrist after using this tool for drilling purposes.
  • Lightweight machine The Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill has a weight of only just 3.5 pounds which makes it a lightweight product to carry from one place to another. It is only 911-3/8-inches long which makes the machine a compact size device.

Cons

  • Not appropriate for heavy duty work This hammer drill machine is not suitable for the heavy duty work. You can only use it for the household purposes in comparison to the professional use as it meant for the light duty work.
  • High Maintenance costs You have to spend lots of money for maintaining the Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill. It can create a burden on your pocket if you have a small budget.
  • Not food Speed Control You can set the speed of the machine either at full speed or the too low speed. You cannot set it to the level which you want.
  • Loud machine It creates lots of noise while drilling in the surface. Such noise can be very irritating and annoying sometimes. You cannot use this tool without disturbing the other members of your family.
Hitachi FDV16VB2
View on Amazon

Frequently Asked Questions (FAQs)

Q: Is it possible to run theHitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill in the regular mode in place of the hammer option?

Yes, of course, you can run it on the normal mode safely as it is also an excellent drill as well as the driver. You just need to switch the hammer mode to the drill driver mode.

Q: Hi, I have bought this drilling machine last month but lost the chuck keys of the machine. Can you please tell me the size of the chuck key so that I can buy again?

Yes, you can purchase the chuck key of the size 5/8-in from any shopping website or store in the market.

Q: Does this machine functions on 220V?

No, this machine functions on the 120V.

Q: Can you please tell me that what type of bit is required in the Hitachi FDV16VB2 drill machine?

It needed a 1/8″ size bit in the drill machine. The chuck of the machine is adjustable which can have numerous sizes.

Q: Is it possible to drill a concrete wall with the help of the Hitachi FDV16VB2?

Yes, you can drill the concrete wall with the aid of the 1/4 inch bit in few seconds.

Q: What is the weight of the Hitachi FDV16VB2 drill machine? Can I easily carry it?

It has a weight of 3.5 pounds which makes the drilling machine a lightweight product which you can easily carry from one place to another without much issue.

Q: How much power is required for running this machine?

It is an electric hammer driller machine which runs on the single phase 120V AC 60 Hz.

Q: I have heard that Hitachi FDV16VB2 comes with the two different speed settings. Is this true?

Yes, it is true. It comes with the two-speed settings which range between 0 to 2900 RPM. Both the speeds settings help in covering all kinds of driving, drilling, and hammer applications.

Q: Can you please tell me that for what purpose the chuck key used in this product?

The 3-jaw chuck key is required for tightening and loosening the keys of the drill machine. It comes with the 5/8-in chuck size.

Q: What are the dimensions of the machine?

The dimensions of the Hitachi FDV16VB2 are 14.8 x 13.4 x 4.3 inches.

Q: Is it a durable machine to purchase?

Yes, it is quite a durable machine to buy. The construction of the Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill is done with the help of the ball and needle bearing. It all benefits in the long running of the tool.

Q: Can I drill the steel or wood with the Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill?

Yes, you can drill the 1/2-inch holes in steel, 5/8-inch holes in masonry and up to 1-inch holes in wood. It can do multiple drilling jobs easily.

Q: What is the rotation max speed of the machine? Is it enough for doing any heavy duty job?

The maximum RPM of the machine is 2900 which is quite enough for doing heavy duty jobs. But still, we do not recommend this machine for doing any heavy duty jobs.

Q: Will I get any accessories along with the Hitachi FDV16VB2Amp 5/8-Inch Hammer Drill? If yes, then can you please name them?

Yes, you will get accessories along with the Hitachi FDV16VB2 Amp 5/8-Inch Hammer Drill like Side Handle, Depth Gauge, Chuck Key, Injection molded plastic case, Instruction Manual and one Year Limited Warranty. All these things will make your drilling job much easier and stress-free to do.

Q: What is the power capacity of the motor in Hitachi FDV16VB2?

The Hitachi FDV16VB2has a high power 5 amp motor which situated inside the machine for doing any drilling job. It is a single phase and series commutator motor.

Q: What is the total length of the hammer drill?

It is a small size machine which has a length size of only 11-3/8-inches. It means you can effortlessly carry this machine along with you if needed.

Q: How much warranty period is offered by the manufacturers on the Hitachi FDV16VB2?

The manufacturer of the product provides the 1-year warranty on the tool along with 30 days money back guarantee offer. So, if you get any problem in the machine or in case you want to replace any defected part of the tool then just call the manufacturing company.

Hitachi FDV16VB2
View on Amazon

Conclusion

In the end, we just want to say that if you are looking to buy a light duty hammer drill machine then, Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill is a perfect option for buying. You can easily use this tool for doing household works like drilling, plumbing, woodworking, etc.

There are lots of drill machines which are viable in the market which makes your buying decision very difficult. But now you don’t have to worry. In the above article, we have reviewed the Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill very doing thorough research and study. We have tried to cover all the essential aspects of the product which you require while considering any machine for buying. This machine is an excellent combination of innovation and technological features which you want in your tool.

We are sure that you will get fully satisfied after buying the Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill for your home. It is a highly recommended product for the light duty jobs.

So, don’t waste much time and book yourself a Hitachi FDV16VB2 on the Amazon shopping website quickly.

However, if you have any doubt or query regarding the above article then just simply write to us in the below comment box. We will surely reply back to you soon.

Summary
Review Date
Reviewed Item
Hitachi FDV16VB2
Author Rating
41star1star1star1stargray
Click Here to Leave a Comment Below 1 comments
WAYNE STEVENSON - March 7, 2020

I’m not certain what you mean by light duty, but it must be very light indeed. I purchased one at Menards about 3 or 4 years ago to drill approximately 12 – 1/2″ holes in concrete. It struggled to do the job. I hadn’t used it since then until this week when I attempted to drill a 4 1/4″ hole using a masonry hole saw through a brick wall. At about 1/4″ into the wall the drill starting smoking with flames shooting out the back. Granted it wasn’t an easy job but I was not pushing it very hard. I would not recommend this machine at all.

Reply

Leave a Reply: